Yamaha AW4416 MIDI Remote Template AW4416 --REMOTE --> NUENDO Installation Using a MIDI cable, connect the MIDI OUT of a MIDI sequencer to the MIDI IN of the AW4416. Load the "nuendo.mid" bulk data file into the MIDI sequencer and start playback to send the data to the AW4416. NUENDO Settings 1. From the Menu bar, select Devices > Device Setup 2. In the "Devices" section, select Generic Remote. 3. Under "Setup," click the Import button and locate the Nuendo setup file (AW4416.xml). 4. From the MIDI Input/Output pop-up menu, choose the MIDI port that's connected to the AW4416. 5. Click the Apply button and then the OK button, and you're done. Feature Overview This template makes it possible to control the mixer parameters of Nuendo music production software remotely with the AW4416. Main Functions Remote control over 16 channels of NuendoÕs VST mixer (fader, mute and pan) Detailed Template Settings AW4416 PLG150-AN Window Control Remote Channel Remote Function Remote A On 1-8 VST CH. 1–8 Mute Fader 1-8 Fader Remote B On 1-8 VST CH. 9–16 Mute Fader 1-8 Fader Remote C On 1-8 VST CH. 1–8 Pan Center Fader 1-8 Pan Remote D On 1-8 VST CH. 9–16 Pan Center Fader 1-8 Pan NOTE: LEDs will display in reverse of the usual AW display. NOTE: This template is for controlling Nuendo mixing parameters from the AW4416. Bi-directional communication between the AW4416 and Nuendo is not possible. If you change the parameter settings on the Nuendo side, they will contradict the current status of the AW4416. Please visit the AW4416 website for information related to the AW4416. http://www.AW4416.com (C) 2002 YAMAHA CORPORATION All Rights Reserved